• Haul your materials faster with an accelerated travel speed.
    
• Put more power to the ground with increased torque.
    
• Enjoy greater productivity while using a more responsive Traction
  Control System (TCS).
    
• Reduce tire wear with maximum by engaging TCS early in the slip.
    
• Strong, predictable performance helps operators achieve the lowest cost per ton.

    
• Up to 11% less fuel consumption.
    
• Advanced Productivity Electronic Control System (APECS) allows the engine and transmission to communicate on a high level. This communication allows the machine to better utilize the power and torque the engine is producing.
    
• Automatically optimize fuel consumption with the feature—Adaptive Economy mode reduces fuel use without affecting productivity and can be engaged with a single button.
    
• Gain improvements in fuel efficiency with auto-neutral idle.
    
• Haul your 770 truck at a more fuel-efficient engine speed and gear selection with speed limiting.
    
• Conserve fuel with integrated Engine Idle Shutdown by the engine automatically initiating when the truck is in park and idle for a preset amount of time.
  
  
  
  
  
  
  
  

    
• Improvements in accessibility with safe, ground-level access to fuel fill and daily maintenance points.
    
• The Cat® Detect Seat Belt Reminder System monitors seat belt use and alerts the operator if the seat belt isn’t fastened correctly, helping improve safety and reduce the risk of injury on the jobsite.
    
• Superior brake performance meets the latest brake standards—
      ISO 3450:2011.
    
• The ground-level engine shut-off switch stops all fuel to the engine when activated and shuts down the machine safely.
    
• Sturdy 4-point mounted cabin meets rollover protective structure/
      falling objects protective structure (ROPS/FOPS) standard.
    
• 4-point seat belt provides enhanced safety to the operator.
    
• Seat belt indicator implements both visual and audible alerts to the
      operator when seat belt is not fastened.
    
• Lockout features help the service technician to perform
      maintenance work on the machine with safe mode.
    
• Secondary steering activates automatically in case of primary
      system failure.
    
• Overload speed limiter works with truck payload system to reduce
      machine speed automatically when the truck is overloaded. 

    
• Completely redesigned cab for a whole new standard in visibility, comfort, and productivity.
    
• The new operator seat placement provides easier operation and comfort to the operator.
    
• Improvements in enlarged views of the work area and its surroundings.
    
• Access connectivity and decrease clutter with more storage areas in the newly designed cab.
    
• Automatic cab temperature controls.
    
• Cat next-generation deluxe seat for better operator comfort.
    
• Shift Lever with integrated fingertip hoist control enables intuitive hoist operation directly from the shift lever for enhanced comfort and productivity

    
• Integrated systems give you the ability to make timely, fact-based 
  decisions to maximize efficiency, improve productivity, and lower
  costs.
    
• Gain valuable insight into how your machine is performing by continuously
   monitoring and collecting vital machine data via the bronze display with the software Vital Information Management System (VIMS™).  Applicable to both U.S. EPA Tier 4 Final/EU Stage V and U.S. EPA Tier 2 equivalent.
    
• Cat Payload - Improved payload accuracy, Cycle segmentation changes, and support next-generation product link radios.
    
• External payload indicator lights alert the loader when to stop, reducing the risk of machine overloading.
    
• Product Link™ system connects to each machine wirelessly, 
  allowing you to monitor location, hours, fuel use, productivity, idle
  time, and diagnostic codes.
    
• VisionLink®
  wirelessly connects you to your equipment, giving
  you access to essential information you need to know to run your business.
    
• The Cat 770 is MineStar™ ready and includes Cat Product Link
  Elite and VIMS to help optimize equipment management, remote
  monitoring capabilities, machine availability, and component life while reducing both repair costs and the risk of catastrophic 
  failure.
    
• Tons kilometers per hour/tons miles per hour (TKPH/TMPH) tire management system works with TPMS for improved tire life. 

• Grouped service points.
• Control particulate matter with two engine-mounted diesel
oxidation catalyst canisters. (Tier 4)
• NOx reduction system (NRS) technology replaces a portion of intake air with exhaust gas to control combustion temperatures and NOx production.(Tier 4)
• Parts commonality with other Cat equipment.
• Resolve problems before failure occurs with VIMS notifications.
• Torque converter stall (autostall) enables quick operating temperatures for best performance life.
• All LED lights provide longer life, brighter light, consume less power, and are more resistant to vibration or water damage. 

    
• Get the right body option—Dual Slope, Flat Floor, or Quarry—for your material and jobsite needs.
    
• For haul profiles including steep slopes, an optional Dual Slope body is available—offering excellent material retention.
    
• The flat floor body is perfect for metering material, especially when
      feeding the crusher. 
    
• Optimize your body life by selecting a liner package best suited
      for your application. We offer steel liners that work for most applications as well as rubber liners for extreme applications. 

Standard and optional equipment may vary. Consult your Cat dealer for details.

Alarm, backup

Product Link Ready

Driveline

Air conditioning

Air-To-Air Aftercooler (ATAAC)

Suspension, front and rear

Body safety pin (secures body in up position)

Extended Life Coolant to -35° C (-30° F)