7395
At Caterpillar, we're always thinking of new ways to meet our customers' needs. It's how we constantly improve on the electric rope shovel and provide the extreme levels of productivity and cost-effectiveness that our global customers demand.
7395
At Caterpillar, we're always thinking of new ways to meet our customers' needs. It's how we constantly improve on the electric rope shovel and provide the extreme levels of productivity and cost-effectiveness that our global customers demand.
Product Brochures
Specifications
Dimensions
-
Dipper Payload70 t 64 t
-
Dipper Capacity20.6-55.8 m3 (27-73 yd3)
-
NoteDependent on application and material density.
Electrical
-
DriveIGBT Acutrol drive system.
-
Power Requirements - Peak power4165 hp 3106 kW
-
Power Requirements - Voltage3 phase, 50/60 Hz, 7,200V
-
Power Requirements - Average Power Demand777-1087 kW (1,042-1,458 hp)
-
Power Requirements - 60 Hz7,200V
-
Power Requirements - 50 Hz6,000V, 6,600V, 7,200V, 11,000V
-
NoteOther voltages available to suit customer requirements.
Front End
-
Rope Data - Crowd - Diameter2.5 in 64 mm
-
Rope Data - Dipper Trip - Diameter0.625 in 16 mm
-
Rope Data - Hoist - Diameter2.75 in 70 mm
-
Rope Data - Boom Suspension - Diameter3.25 in 83 mm
-
Rope Data - Crowd - No.1
-
Rope Data - Retract - No.1
-
Rope Data - Dipper Trip - No.1
-
ComponentsOne piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle.
-
Rope Data - Boom Suspension - No.4
-
CrowdRope Crowd: the crowd machinery is located at the front center of the revolving frame; consisting of a motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft.
-
Rope Data - Hoist - No.2
-
Rope Data - Retract - Diameter2.5 in 64 mm
-
NoteHigh impact ropes available as an option
Lube System
-
TypeAutomatic, single-line system for open gear lubricant and grease.
-
Components (1)6 pumps (4 for open gear lubricant and 2 for grease) located in an insulated, heated, double-walled lube room.
-
Components (2)External fast fill from lower level.
Main Structures
-
Ground Bearing Pressure - 274.3 cm (108 in) Treads43 psi 296 kPa
-
Planetary PropelDual-motor independent drive.
-
Crawler Dimensions - Overall Width 213.4 cm (84 in) Treads, Standard32.75 ft 10 m
-
Ground Bearing Pressure - Total Effective Bearing Area (2)442 ft² 41 m²
-
Ground Bearing PressureGround bearing pressure is dependent upon many factors.
-
Ground Bearing Pressure - Total Effective Bearing Area (1)343 ft² 32 m²
-
Upper Works Overall Width - Including Standard Walkways44.25 ft 13.5 m
-
Crawler Dimensions - Overall Width 274.3 cm (108 in) Treads34.75 ft 10.6 m
-
Ground Bearing Pressure - 213.4 cm (84 in) Treads - Standard54 psi 371 kPa
-
SwingTwo planetary gearboxes, each driven by a vertically mounted motor, are located on either side of the revolving frame. Dual-output pinion shafts from each gearbox engage the swing rack.
-
HoistA planetary gearbox with dual-output pinions provides the hoist torque transfer from the electric motor to the hoist drum gear.
Optimal Working Ranges*
-
Cutting Height - Maximum48.75 ft 14.9 m
-
Dumping Height - With Clearance to Open Dipper Door30.84 ft 9.4 m
-
Cutting Radius - Maximum74.75 ft 22.8 m
-
Radius of Level Floor52.49 ft 16 m
-
Revolving Frame Tail Swing Radius30.51 ft 9.3 m
-
Note (1)Optimal working ranges based on loading a Cat® 793F truck.
-
Note (2)*All specifications are based on a 24 m3 (32 yd3) dipper and standard 213.4 cm (84 in) treads.
Weights
-
Working Weight - With Dipper and Standard Links2652000 lb 1202927 kg
-
Ballast - Furnished By Customer574000 lb 260362 kg
-
Note (1)These weights will vary slightly depending upon dipper and optional equipment selection.
-
Note (2)All specifications are based on a 24 m3 (32 yd3) dipper and standard 213.4 cm (84 in) treads.
Product videos
Request a Quote
