6030
Proven success in nearly every surface mining application across the globe substantiates the durability of Cat® hydraulic shovels. Our equipment is engineered to endure the most difficult digging environments and the harshest conditions to afford our customers the greatest productivity. Simply stated, Cat hydraulic shovels are built to last.
6030
Proven success in nearly every surface mining application across the globe substantiates the durability of Cat® hydraulic shovels. Our equipment is engineered to endure the most difficult digging environments and the harshest conditions to afford our customers the greatest productivity. Simply stated, Cat hydraulic shovels are built to last.
Specifications
Attachments
-
Shovel attachment with unique TriPower kinematics ensuring the following main features: (1)Automatic roll-back limiter to prevent material spillage and kinematic assistance to hydraulic forces
-
Shovel attachment with unique TriPower kinematics ensuring the following main features: (2)Horizontal automatic constant-angle bucket guidance and vertical automatic constant-angle bucket guidance
-
Shovel attachment with unique TriPower kinematics ensuring the following main features: (3)Constant boom momentum throughout the whole lift arc and crowd force assistance
-
All buckets (FS and BH) are equipped with a wear package consisting of: (1)Special liner material covering main wear areas inside and outside of bucket and lip shrouds between teeth
-
All buckets (FS and BH) are equipped with a wear package consisting of: (2)Wing shrouds on side walls and heel shrouds at bottom edges
-
Type (1)Catwalks with rails at booms
-
Type (2)Special wear packages for highly abrasive materials on request
-
Type (3)Pressure-free lowering of boom (FS and BH) and stick (FS) by means of a float valve
-
Type (4)Welding procedures allow for internal counter-welding (double prep weld) wherever possible
-
Type (5)Booms and sticks are stress-relieved after welding
-
Type (6)Booms and sticks are torsion-resistant, welded box design of high-tensile steel with solid steel castings at pivot areas
Automatic Lubrication System
-
Capacity - Grease Container119 gal (US) 450 l
-
Type (1)Dual-circuit system with hydraulically driven heavy-duty pump and electronic time relay control to adjust the pause/lube times
-
Type (2)Connected to the lubrication system are the swing roller bearing with internal gearing and all pivot points of attachment, bucket and cylinders
-
Type (3)Lubricated pinion for greasing of internal gearing of swing ring
-
Type (4)System failures displayed by Board Control System
-
Type (5)Grease filters between service station and container as well as directly behind grease pump
Bucket
-
Bucket Capacity - Face Shovel (heaped 2:1)21.6 yd³ 16.5 m³
-
Bucket Capacity - Backhoe (heaped 1:1)22.2 yd³ 17 m³
Diesel Engine - Highly Regulated
-
Gross Power - SAE J19951649 hp 1230 kW
-
Net Power - ISO 92491625 hp 1212 kW
-
Net Power - SAE J13491541 hp 1149 kW
-
EmissionsMeets U.S. EPA Tier 4 Final and EU Stage V emission standards
Diesel Engine - Lesser Regulated
-
Gross Power - SAE J19951531 hp 1142 kW
-
Net Power - SAE J13491425 hp 1063 kW
-
Net Power - ISO 92491511 hp 1127 kW
-
EmissionsMeets China Nonroad Stage III emission standards, equivalent to U.S. EPA Tier 2
Diesel Engines
-
Number of Cylinders - Each Engine12
-
Bore5.42 in 137.7 mm
-
Stroke6 in 152.4 mm
-
Displacement1648 in³ 27 l
-
AspirationTurbocharged and air-to-air aftercooled
-
Components (1)Hydraulically driven radiator fan with electronically controlled fan speed
-
Components (2)Micro processed engine management
-
Components (3)Heavy-duty air filters
-
Components (4)Two-stage fuel filter, including water separator
-
Components (5)Additional high-capacity water separator
-
EmissionsMeets U.S. EPA Tier 4 Final and EU Stage V emission standards
-
Fuel Tank Capacity1342 gal (US) 5080 l
Digging Forces
-
Maximum Crowd Force291700 ft·lbf 1298 kN
-
Maximum Tearout Force212150 ft·lbf 944 kN
Electrical System
-
Batteries4 maintenance-free batteries
Electrical System - Diesel Drive
-
System Voltage24V
-
Batteries in Series/Parallel Installation4 x 210 Ah at 12V each; 420 Ah with 24V in total
-
Components (1)Battery isolation relays
-
Components (2)Emergency stop switches accessible from ground level and in engine module
-
Components (3)14 LED high-brightness working flood lights
-
Components (4)11 LED service lights
General
-
Engine Output - SAE J19951649 hp 1230 kW
-
Bucket Payload33 ton (US) 30 t
-
Operating Weight324 ton (US) 294 t
-
NoteSpecifications shown above apply to the highly regulated Face Shovel configuration. Backhoe and Frontless configurations are also available for all regions.
Hydraulic Oil Cooling
-
Oil Flow of Cooling Pumps - Diesel Version2 x 467 L/min (2 x 123 gal/min)
-
Diameter - Fan48 in 1220 mm
Hydraulic System with Pump Managing System
-
Hydraulic Tank Capacity - Approximately707 gal (US) 2675 l
-
Total Volume of Hydraulic Oil - Approximately925 gal (US) 3500 l
-
Main Pumps4 x variable swash plate pumps
-
Main Pumps - Maximum Oil Flow - Diesel Version4 x 552 L/min (4 x 146 gal/min)
-
Maximum Pressure - Attachment4495 psi 310 bar
-
Maximum Pressure - Travel5220 psi 360 bar
-
Swing Pumps2 x reversible swash plate double pumps
-
Swing Pumps - Maximum Oil Flow - Diesel Version4 x 197 L/min (4 x 52 gal/min)
-
Maximum Pressure - Swing Pumps5076 psi 350 bar
Operating Weights
-
6030 FS - Standard Track Pads3.25 ft 1000 mm
-
6030 FS - Operating Weight657640 lb 298300 kg
-
6030 FS - Ground Pressure32.2 psi 22.2 N/cm²
-
6030 - Standard Track Pads3.25 ft 1000 mm
-
6030 - Operating Weight660060 lb 299400 kg
-
6030 - Ground Pressure32.3 psi 22.3 N/cm²
-
NoteOther track pads available on request. Operating weights include: base machine, front attachment, standard track pads, standard rock bucket, and 100% fuel and lubricants.
Operator's Cab
-
Operator's Eye Level - Approximately21.33 ft 6.5 m
-
Internal Dimensions of Cab - Length7.22 ft 2200 mm
-
Internal Dimensions of Cab - Width5.25 ft 1600 mm
-
Internal Dimensions of Cab - Height7.05 ft 2150 mm
-
Components (1)Under roof mounted heating ventilating and air conditioning system
-
Components (2)External sun shields at side and rear windows
-
Components (3)Robust instrument panel including large colored BCS screen with transflective technology
-
Components (4)Board Control System (BCS) electronic monitoring and data logging system for vital signs and service data of engines, hydraulic system and lubrication system
-
Components (5)Hydraulically operated 45 degree access stairway
-
Components (6)Emergency egress ladder with ladder cage
-
Components (7)Switch in seat cushion to automatically neutralize the hydraulic controls when operator leaves the seat
-
Components (8)Pneumatically cushioned and multi-adjustable comfort seat with lumbar support, seat heating, safety belt, head- and armrests
-
Components (9)Roller blinds at all windows
-
Components (10)Windshield with parallel intermittent wiper/washer
-
Components (11)All-round safety glass, armored windshield and sliding side window
-
Components (12)Operator Protective Guards (ISO 10262:1998 Level II
-
Components (13)Joystick controls integrated in independently adjustable seat consoles
-
Components (14)Fold-away auxiliary seat with safety belt
Swing System
-
Swing Drive2 compact planetary transmissions with axial piston motors
-
Parking BrakesWet multiple-disc brake, spring-loaded/hydraulically released
-
Maximum Swing Speed - Diesel Version4.6 r/min 4.6 r/min
-
Swing RingTriple-race roller bearing with sealed internal gearing
-
Maximum Swing Speed - AC Version5 r/min 5 r/min
Undercarriage
-
Travel Speed - 1st Stage - Maximum0.87 mile/h 1.4 km/h
-
Travel Speed - 2nd Stage - Maximum1.68 mile/h 2.7 km/h
-
Maximum Tractive Force360144 ft·lbf 1602 kN
-
Gradeability - Travel Drives - Approximate47 % 47 %
-
Track Pads - Each Side44
-
Bottom Rollers - Each Side7
-
Support Rollers - Each Side2 plus a skid plate in between
-
Travel Drives - Each Side1 planetary transmission with 2 two-stage axial piston motors
-
Parking BrakesWet multiple disc brake, spring loaded/hydraulically released
-
Components (1)All running surfaces of sprockets, idlers, rollers and pad links, as well as teeth contact areas of sprocket and pad links, are hardened
-
Components (2)Cast double-grouser combined pad-links with bushings connected by hardened full floating pins
-
Components (3)Fully hydraulic self-adjusting track tensioning system with membrane accumulator
-
Components (4)Automatic hydraulic retarder valve to prevent over-speed on downhill travel
-
Components (5)Acoustic travel alarm
Benefits
SAFETY
- Safety glass in all windows and armored windshield protect operators.
- Five emergency shut-off switches, with one easily accessible in the cab to shut down the electrical system in case of emergencies.
- Safer access and egress with anti-slip walkways, 45-degree hydraulically operated access stairway and emergency egress ladder located in direct proximity to the cab.
- Safer service with lockable starter and battery isolation switch cabinet, improved routing and separation of hydraulic lines and electric cables, pressure relief caps and protective covers on all hot surfaces.
- Excellent visibility, enhanced by optional two-camera system and standard LED high-brightness working and service lights.
OPERATOR CAB
- Easy access to intuitive, informative onboard electronics, plus large, color touchscreen that puts vital machine and diagnostic data at the operator’s fingertips.
- Maintained ambient temperature with optional dual HVAC system.
- Easily accessible ergonomic joysticks with Electronic-Hydraulic Servo Control, which delivers dynamic and precise response and ensures no hydraulic lines are present in the cab.
- Clean arrangement and less noise, with no hydraulic lines present in the cab or the cab module,
- Pneumatically cushioned, multi-adjustable, heated seat, plus auxiliary trainer seat with retractable seat belt.
RELIABILITY & DURABILITY
- Integrated carbody and crawler frames with Cat® HD undercarriage, which extends service life and offers improved durability and lower owning and operating costs.
- Heavy duty fixed-axle rollers and idlers for improved performance, increased wear life, reduced internal friction and overheating, and lifetime lubrication and duo cone seals for reduced maintenance.
- Heavy duty track group, which handles high field loads, and reduced pitch extension wear, which increases track chain life by 20% to 40%.
- Structures designed and fabricated to withstand the toughest digging conditions, with high-strength steel, heavy castings at attachment pivot points and booms and sticks that are stress-relieved after welding.
PRODUCTIVITY & PERFORMANCE
- Durable Cat C27 engines, which offer unsurpassed performance, high power output and proven reliability, and have been proven to withstand the challenging conditions found at mine sites across the globe.
- Greater productivity, less energy and fuel consumption and reduced wear thanks to intelligent pump managing system, which continuously evaluates actual engine and hydraulic operating values against set values and adjusts pump output accordingly.
- Reduced cycle times thanks to the use of float valves rather than engaging pumps to lower the boom, which facilitates faster boom movements and allows other operating functions such as bucket curl and stick in/out to occur simultaneously.
- Easier and faster face shovel operation with unique TriPower design, which generates superior mechanical leverage and control.
- Increased productivity and greater uptime with the twin engine concept, which enables up to 65% of full production with a single engine.
BUCKETS & GET
- Buckets and ground engaging tools (GET) designed to maximize durability and productivity and ideally matched to your shovel and application.
- Integrated to work as part of a machine system — helping you achieve high productivity and the lowest cost per ton.
- Variety of sizes and wear packages for the ideal match to your shovel and application.
- Deliver optimal payload when combined with Cat GET and wear components.
- Wear packages that protect your investment, including special liner material and lip shrouds, wing shrouds and heel shrouds.
CONNECTIVITY & TECHNOLOGY
- Greater connectivity with improved Product Link™ Elite system, which increases the availability of data provided by the 6030 and allows it to collect and transmit information into locally hosted or cloud-hosted applications such as Cat MineStar™ Solutions Health Office, Health Equipment Insights, or Equipment Care Advisor.
- Enhanced diagnostic capabilities and troubleshooting functions with factory-installed Monitoring and Diagnostic System.
- Earliest possible detection of faults, with Board Control System that uses sensors throughout the machine to monitor operating data, record faults, and notify the operator audibly and visually.
SERVICEABILITY
- Better organized hoses and components, plus integration of Cat hoses and couplings, which offer industry-leading reliability and performance and ability to source locally using all Cat materials.
- Service station that provides easy access to functions such as coolant, hydraulic oil, slew gear box oil, grease, and diesel and engine oil.
- Reduced maintenance downtime thanks to exchange intervals for engine oil and engine filters that have been increased from 500 to 1,000 hours.
- Clear arrangement of components on the superstructure, which allows easy access and serviceability for coolant expansion tanks, air intake filters, oil tank breather, HVAC units, grease tank, exhaust, and starter and battery isolator.
- Access to Cat Electronic Technician (ET), which enables easy diagnosis of potential engine problems and can help prevent future issues.
SUSTAINABILITY
- Highly regulated C27 engines that meet U.S. EPA Tier 4 Final and EU Stage V emission requirements and eliminate the need for DEF, saving time and cost during maintenance.
- Less heat and improved efficiency with the closed-loop swing circuit.
- Reduced waste and lower owning and operating costs thanks to increased commonality of systems and components, plus a reduction in unique part numbers.
- Preservation of raw materials, energy conservation and reduced emissions through the Cat Reman program, which returns end-of-life components to like-new condition.
Equipment Info
2 x Cat C27 engines
Cat Technology
Cat Product Link™ Elite (Cellular)
Service and Maintenance
Engine oil exchange interval -- 500 hours
Safety and Security
Emergency stop switches: 1 in cab, 3 in engine module, 1 pull rope accessible from ground level and 1 on service station
Miscellaneous
ISO or ANSI decals
Aftertreatment system (used in Tier 4 Final only): -Diesel Oxidation Catalyst (DOC) -NOx Reduction System (NRS) -Non-DEF solution
Cat Powertrain
Air-to-Air After Cooling (ATAAC)
Hydraulics
Pump managing system with: -- Electronic load limit control -- Flow on demand -- Automatic zero flow regulation -- Automatic engine RPM reduction -- Reduced oil flow at high hydraulic oil or engine temperature
Electrical System
Four maintenance-free batteries
Undercarriage
HD tracks with cast double-grouser track pads
Automatic Lubrication System
Lubricated pinion in swing ring
Operator Environment
Single HVAC system
Front Attachment
Service access holes in boom and stick (FS and BH)
Product videos
Request a Quote



