New Equipment

We supply the best heavy equipment so you can build a better business!

Toromont Cat is the trusted dealership in Canada for authentic Caterpillar heavy equipment. We have a wide selection of Cat equipment that includes over 300 machines and 1,200 specialized product attachments for projects in a variety of industries such as construction, mining and forestry. With our extensive product line and first-class customer service, we aim to be your first choice when looking for new heavy equipment.

Caterpillar equipment is recognized and respected globally for its reliability and durability, and at Toromont Cat, we proudly maintain all of our new construction equipment to the highest standards so that it exceeds your expectations on the job site. Whether you’re looking for wheel loaders, excavators, dozers or articulated trucks, you can count on us to help you complete your projects with cost-effective and technologically advanced solutions.

When you choose to buy new heavy equipment with us, you will always be provided with quality machines and superior after-sales support.

If you’re currently working on a project that requires new heavy equipment, call us today!

To see all of our new heavy equipment currently for sale, click on the images below:

Large Wheel Loaders 992K

Cat® Large Wheel Loaders set the standard for optimized productivity, minimizing downtime, enhancing operator comfort, and protecting people on your jobsite through key safety features.

Large Wheel Loaders 992K

Cat® Large Wheel Loaders set the standard for optimized productivity, minimizing downtime, enhancing operator comfort, and protecting people on your jobsite through key safety features.
Units: USMetric

Axles

Front Fixed
Rear Oscillating
Oscillation Angle 10° ±, 8° ± with Stops
Units: USMetric

Brakes

Brakes Meet ISO 3450:2011
Units: USMetric

Buckets

Bucket Capacities 10.7-12.3 m3 (14-16 yd3)
Units: USMetric

Dimensions - High Lift - Approximate

Wheel Base 19.32 ft 5890 mm
Ground to Lower Hitch Clearance 2.24 ft 682 mm
Rear Axle - Centerline to Bumper 13.76 ft 4195 mm
Maximum Overall Height - Bucket Raised 33.08 ft 10109 mm
Ground to Top of Exhaust Stacks 17.22 ft 5248 mm
Rack Back Angle - Carry 52.5 degrees
Maximum Overall Length 52.81 ft 16095 mm
Rack Back Angle - Ground Level 42.8 degrees
Ground to Bumper Clearance 3.86 ft 1176 mm
Ground to Center of Axles 4.44 ft 1352 mm
Dump Angle at Maximum Lift 50 degrees
Ground to Top of ROPS 18.63 ft 5678 mm
Tread Width 10.83 ft 3302 mm
Clearance at 45° Dump (Tooth Tip) 15.01 ft 4574 mm
Reach - Maximum Lift 6.86 ft 2092 mm
Ground to Top of Hood 13.26 ft 4043 mm
B-Pin Height - Maximum Lift 24.58 ft 7544 mm
Rack Back Angle - Maximum Lift 65 degrees
Units: USMetric

Dimensions - Standard Lift - Approximate

Ground to Top of ROPS 18.63 ft 5678 mm
Ground to Top of Exhaust Stacks 17.22 ft 5248 mm
Dump Angle at Maximum Lift 50 degrees
Ground to Bumper Clearance 3.86 ft 1176 mm
Tread Width 10.83 ft 3302 mm
Ground to Top of Hood 13.26 ft 4043 mm
Ground to Lower Hitch Clearance 2.24 ft 682 mm
Maximum Overall Length 52 ft 15736 mm
B-Pin Height - Maximum Lift 22.73 ft 6927 mm
Clearance at 50° Dump (Tooth Tip) 14.7 ft 4480 mm
Wheel Base 19.32 ft 5890 mm
Rack Back Angle - Maximum Lift 65 degrees
Maximum Overall Height - Bucket Raised 30.5 ft 9313 mm
Rack Back Angle - Ground Level 43.4 degrees
Rear Axle - Centerline to Bumper 13.76 ft 4195 mm
Rack Back Angle - Carry 52.7 degrees
Ground to Center of Axles 4.44 ft 1352 mm
Reach - Maximum Lift 6.95 ft 2118 mm
Units: USMetric

Engine

Net Power 814 HP 607 kW
Engine Model Cat® C32 ACERT™
Bore 5.7 in 145 mm
Stroke 6.4 in 162 mm
Displacement 1963.5 in³ 32.1 l
Emissions (U.S. EPA Tier 4 Final): Rated Speed 1750 r/min 1750 r/min
Emissions (Tier 2 Equivalent): Gross Power - SAE J1995 907 HP 676 kW
Emissions (U.S. EPA Tier 4 Final): Net Power - SAE J1995 814 HP 607 kW
Emissions (U.S. EPA Tier 4 Final): Net Power - SAE J1349 814 HP 607 kW
Emissions (Tier 2 Equivalent): Net Power - SAE J1349 814 HP 607 kW
Emissions (U.S. EPA Tier 4 Final): Peak Torque at 1,200 rpm - SAE J1995 3514 lb/ft 4765 N·m
Emissions (U.S. EPA Tier 4 Final): Gross Power - SAE J1995 900 HP 671 kW
Emissions (Tier 2 Equivalent): Peak Torque at 1,200 rpm - SAE J1995 3537 lb/ft 4796 N·m
Emissions (U.S. EPA Tier 4 Final): Gross Power - ISO 14396 884 HP 659 kW
Torque Rise 30%
Note (Tier 2 Equivalent) (2) Rating for net power advertised is based on power available when the engine is equipped with alternator, air cleaner, muffler, and on-demand hydraulic fan drive at maximum fan speed.
Note (Tier 4 Final) (1) These ratings apply at 1,750 rpm when tested under the specified standard conditions.
Emissions (Tier 2 Equivalent): Gross Power - ISO 14396 884 HP 659 kW
Emissions (Tier 2 Equivalent): Rated Speed 1750 r/min 1750 r/min
Note (Tier 2 Equivalent) (1) These ratings apply at 1,750 rpm when tested under the specified standard conditions.
Emissions (Tier 2 Equivalent): Net Power - SAE J1995 814 HP 607 kW
Note (Tier 4 Final) (2) Rating for net power advertised is based on power available when the engine is equipped with alternator, air cleaner, muffler, and on-demand hydraulic fan drive at maximum fan speed.
Units: USMetric

Hydraulic Cycle Times

Total Hydraulic Cycle Time 19.3 s 19.3 s
Dump 1.8 s 1.8 s
Lower Float Down 3.7 s 3.7 s
Raise 9.4 s 9.4 s
Rack Back 4.4 s 4.4 s
Units: USMetric

Hydraulic System - Lift/Tilt

Lift/Tilt System - Pump Variable Displacement Piston
Maximum Flow at 1,850 rpm 254 gal/min 960 l/min
Relief Valve Setting - Lift/Tilt 4500 psi 31000 kPa
Lift Cylinder - Stroke 45.2 in 1148 mm
Lift/Tilt System - Circuit Positive Flow Control
Tilt Cylinder - Bore 10.5 in 266.7 mm
Lift Cylinder - Bore 11 in 279.4 mm
Tilt Cylinder - Stroke 80.9 in 2055 mm
Units: USMetric

Hydraulic System - Steering

Steering System - Circuit Pilot, Load Sensing
Steering System - Pump Piston, Variable Displacement
Maximum Flow at 1,350 rpm 95 gal/min 360 l/min
Steering Cut Off Pressure 4500 psi 31000 kPa
Total Steering Angle 86°
Steering Cycle Times - High Idle 4.4 s 4.4 s
Steering Cycle Times - Low Idle 6.4 s 6.4 s
Units: USMetric

Operating Specifications

Operating Weight 220089 lb 99831 kg
Bucket Capacity Range 10.7-12.3 m3 (14-16 yd3)
Rated Payload - High Lift (Moderate to High Digging Resistance) 21 t 19.1 t
Rated Payload - Standard Lift (Moderate to High Digging Resistance) 24 t 21.7 t
Operating Weight - Standard 220089 lb 99831 kg
Operating Weight - High Lift 221847 lb 100628 kg
Units: USMetric

Service Refill Capacities

Fuel Tank 413 gal (US) 1562 l
Transmission 45 gal (US) 169 l
AC Oil 0.071 gal (US) 0.268 l
Cooling Systems 77 gal (US) 290 l
AC Refrigerant 6 lb 2.72 kg
Engine Crankcase 32 gal (US) 120 l
Differential - Final Drives - Front 95 gal (US) 360 l
Differential - Final Drives - Rear 91 gal (US) 345 l
Hydraulic System - Implement 86 gal (US) 326 l
Hydraulic System - Steering 42 gal (US) 159 l
Units: USMetric

Sound Performance

Operator Sound Pressure Level The operator sound pressure level is 70 dB(A), measured according to the test procedures and conditions specified in ISO 6396:2008 for the standard machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Hearing Protection Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Machine Sound Power Level - Standard Machine Configuration The machine sound power level is 116 dB(A), measured according to the test procedures and conditions specified in ISO 6395:2008 for the standard machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Machine Sound Power Level - Sound Suppressed Machine Configuration The machine sound power level is 113 dB(A), measured according to the test procedures and conditions specified in ISO 6395:2008 for the sound suppressed machine configuration. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Units: USMetric

Transmission

Transmission Type Cat Planetary Power Shift
Forward - 1 4.3 mile/h 6.9 km/h
Forward - 2 7.4 mile/h 11.9 km/h
Forward - 3 12.6 mile/h 20.3 km/h
Reverse - 1 4.7 mile/h 7.6 km/h
Reverse - 2 8.1 mile/h 13.1 km/h
Reverse - 3 13.8 mile/h 22.2 km/h
Direct Drive - Forward 3 14.2 mile/h 22.8 km/h
Direct Drive - Reverse 2 8.8 mile/h 14.2 km/h
Direct Drive - Reverse 1 4.9 mile/h 7.9 km/h
Direct Drive - Reverse 3 15.4 mile/h 24.8 km/h
Direct Drive - Forward 2 8 mile/h 12.9 km/h
Direct Drive - Forward 1 Disabled
NOTE
Standard and optional equipment may vary. Consult your Cat dealer for details.
POWER TRAIN
Air-to-Air After Cooler (ATAAC)
ELECTRICAL
Alarm, back-up
OPERATOR ENVIRONMENT
Air conditioner and heater with automatic temperature control
SAFETY AND SECURITY
Fire suppression ready
OTHER STANDARD EQUIPMENT
Automatic lubrication system
Thank you for filling out our form. Loading animation

Find out more

For more information or to request a quote, please complete the form below.

request-a-form-footer

©2021 Toromont Industries Ltd. All Rights Reserved.
Copyright   Privacy Statement   Policies   Accessibility